monty348 Posted July 14, 2015 Report Share Posted July 14, 2015 I have a crack in the frame that needs welded. Is it safe to weld with the stator and other ignition components still attached to the bike or do I need to remove them? The crack is in the weld at the downtube / headstock joint. Quote Link to comment Share on other sites More sharing options...
lineaway Posted July 14, 2015 Report Share Posted July 14, 2015 I welded the same spot with no issues. It`s held the last two years and I`m a crappy welder. Quote Link to comment Share on other sites More sharing options...
collyolly Posted July 14, 2015 Report Share Posted July 14, 2015 I think the question is will the ignition suffer due to the welding not will the weld work. To be safe I would always remove electrical components if using an electric welder, far cheaper to be safe than sorry. Quote Link to comment Share on other sites More sharing options...
huski Posted July 14, 2015 Report Share Posted July 14, 2015 If you can get the earth clamp from the welder next to the weld it's safe,but if not remove the electrics 1 Quote Link to comment Share on other sites More sharing options...
lineaway Posted July 14, 2015 Report Share Posted July 14, 2015 I meant I had no issues with the electrics. Never seen anyone disconnect electrics for a weld job if grounded properly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.