baldilocks Posted August 15, 2015 Report Share Posted August 15, 2015 Top marks to lineaway then Quote Link to comment Share on other sites More sharing options...
jaydello87 Posted August 15, 2015 Author Report Share Posted August 15, 2015 (edited) Lol don't tell him that... Edited August 15, 2015 by jaydello87 Quote Link to comment Share on other sites More sharing options...
jaydello87 Posted August 16, 2015 Author Report Share Posted August 16, 2015 Base gasket all fitted and piston all cleaned up free of carbon and crap, the rings looked fine so they not being replaced we shall do that another date as they looked pretty decent and like been replaced not to long ago. Tomorrows job is to fit the new gearbox breather and pipe. Radiator is now out so give that a good clean as it has all dried up stuff almost like someone hasn't used the proper coolant probs just anti freeze or water.. So all pipes to be cleaned out and all back on, not a lot of space in there to get that out lol.. Shall have to order the new parts needed then put it all back together next week and hopefully she will run sweet..... 1 Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted August 16, 2015 Report Share Posted August 16, 2015 You probably better could have left the head on the cilinder, like sugested earlier. Those o rings are quite *******. Quote Link to comment Share on other sites More sharing options...
jaydello87 Posted August 16, 2015 Author Report Share Posted August 16, 2015 While we was doing it we wanted to check it all. I'll get some silicone grease and put that on the 2 rings to hopefully hold them in place.. It was just aswell we took it all off tho it really needed a good clean free from carbon and so on its all like new now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.