so99dog Posted August 16, 2015 Report Share Posted August 16, 2015 Hi just bought beta techno 250,1999? Want to replace rear brake lever but can't find one ,will one from a Rev 3 fit.this my first trials so new to trials any advice welcome Quote Link to comment Share on other sites More sharing options...
steve_earle Posted August 16, 2015 Report Share Posted August 16, 2015 Rev 3 won't fit unless i'm really mistaken, Try Trials and Tribulations, They are great for older bike parts. Quote Link to comment Share on other sites More sharing options...
birdy Posted August 16, 2015 Report Share Posted August 16, 2015 (edited) Steve is correct, Rev 3 won't fit, new ones are hard to find, try trials breakers like Richard Allen 01933 314145 Tor Moto breaks bikes or ebay good luck. Edited August 16, 2015 by birdy Quote Link to comment Share on other sites More sharing options...
steve_earle Posted August 16, 2015 Report Share Posted August 16, 2015 It's a shame Beta parts very soon get obsolete on the older models, I think it's a plan to sell newer bikes. For instance, You can not get gaskets for the 2006 Rev 50 anymore among a pile of other things. Quote Link to comment Share on other sites More sharing options...
betatechnopilot Posted September 24, 2015 Report Share Posted September 24, 2015 I agree with you steveearle. I love my 1996 Techno but it gets harder to find parts all the time. Quote Link to comment Share on other sites More sharing options...
poetcycle Posted November 21, 2015 Report Share Posted November 21, 2015 I need a Tecno rear brake pedal too if anyone finds some Quote Link to comment Share on other sites More sharing options...
mspenz Posted December 17, 2015 Report Share Posted December 17, 2015 I've just got hold of a spare rear brake lever & I'm hanging onto it as they appear to be as rare as rocking horse ****! Reason I wanted a spare is because I want to try to straighten my original as it has been bent and is against the chain, anyone had any success in doing this without breaking the lever? Quote Link to comment Share on other sites More sharing options...
beta_blocker Posted December 18, 2015 Report Share Posted December 18, 2015 Heat it before bending and be careful. I've been able to bend my '98 lever back. Also, it's possible to bend back the alloy subframe fender members with heat ( bent and broken them too). 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.