brownee Posted September 16, 2015 Report Share Posted September 16, 2015 After washing the bike (2015 evo factory) at the weekend, 3 decals have come off... wouldnt be so bad if you could order them individually (which you can with the standard apparantly) but you cant... so rather than buy a whole new kit which would be expensive for the sake of 3 decals... does anyone one how to clean them up (the sticky side)... and then what would be the best adhesive or tape or whatever to stick them back on...reluctant to buy a new decal kit after washing the bike about 12 times!!!! any help appreciated. Quote Link to comment Share on other sites More sharing options...
johnnyboxer Posted September 16, 2015 Report Share Posted September 16, 2015 Try 3m Spray Mount glue, in an aerosol form a good stationers Clean the sticky side with solvent brake cleaner and then apply to the 3 decals Worked well for me and sticks like **** to a blanket 2 Quote Link to comment Share on other sites More sharing options...
wakka Posted September 16, 2015 Report Share Posted September 16, 2015 The spray glue works great. After that get a heat gun on med heat move gun up and down over sticker this will make the glue stick even better, 1 Quote Link to comment Share on other sites More sharing options...
paulmac Posted September 17, 2015 Report Share Posted September 17, 2015 The heat gun is the magic bit - do it on your remaining decals too. Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted September 17, 2015 Report Share Posted September 17, 2015 (edited) and make sure the other side is clean (like you can eat from it lol) The enduro bikes are/were know for the decal falling off when looking at them. Edited September 17, 2015 by crazybond700 Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted September 17, 2015 Report Share Posted September 17, 2015 and the question you should ask if you even want originals since they probably dont stick very good again. Quote Link to comment Share on other sites More sharing options...
vanman1950 Posted September 17, 2015 Report Share Posted September 17, 2015 As se Lucas said exs on ebay should be able to help I have recently bought a set for my sherco 4t sure they will help you, I found them very helpful. 1 Quote Link to comment Share on other sites More sharing options...
brownee Posted September 18, 2015 Author Report Share Posted September 18, 2015 Message whoever is selling a kit on ebay and see if they'll do the ones you want separately. If they print them and aren't jerks they'll do it. One I know who will is exs-design (I think) but don't know if they have your model. If you have an svg file any should be able to print it. Ah yea I've actually bought some off him before... couple of years ago. Really good quality. Ill give him a bell. Cheers. 1 Quote Link to comment Share on other sites More sharing options...
brownee Posted September 18, 2015 Author Report Share Posted September 18, 2015 Cheers chaps! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.