dave65 Posted September 21, 2015 Report Share Posted September 21, 2015 (edited) Hi everyone, Looking for a little bit of help, I have been re-building a 1983 TLR200, it has a T joint crankcase breather hose, i am unsure where these connect to as I cannot see any connectors for these to hook into. Slow process but getting on top of it, tnx in advance for any and all help. Cheers Dave Edited September 21, 2015 by dave65 Quote Link to comment Share on other sites More sharing options...
4stroke Posted September 21, 2015 Report Share Posted September 21, 2015 I just run a single pipe from the crankcase connection up to the top of the airbox. There is a plastic 'tab' on the top of the box which the tube fits under. I have seen others run the pipe into the airbox. Just make sure the pipe is not constricted so the cases can breath. A recent bike purchase gave a small surprise as the cdi unit had been mounted in the airbox! 1 Quote Link to comment Share on other sites More sharing options...
dave65 Posted September 22, 2015 Author Report Share Posted September 22, 2015 Hey mate, Tnx for the help pointing that out, I've re-routed the breathers, they are now all cleared away. CDI in the airbox, now that's a novel place to store it... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.