trialsash965 Posted December 1, 2015 Report Share Posted December 1, 2015 Hi all, picked Up a new Mont today I'm not a fan of switches on the handlebars so was wondering (if anybody knows that is..) if I select the map I prefer then unplug the switch from the loom would that work? Thanks in advance Quote Link to comment Share on other sites More sharing options...
aussiechris Posted December 2, 2015 Report Share Posted December 2, 2015 Normally you would pick the map you like then check if the switch is shorted or open circuit using a multimeter. Then simply disconnect and remove the switch. If your preferred position is with the switch in the open circuit condition then just leave the wires on the wiring loom disconnected. If your preference is with the switch closed (shorted) then you will need to connect the two wires in the wiring loom together. Chris. Quote Link to comment Share on other sites More sharing options...
jonnyc21 Posted December 2, 2015 Report Share Posted December 2, 2015 aussiechris has it correct. Its all about what position you like the switch in and keeping the wires connected or not depending on the open/close state of the switch when in the position you like riding. Quote Link to comment Share on other sites More sharing options...
trialsash965 Posted December 2, 2015 Author Report Share Posted December 2, 2015 Thanks for that, I'll have a look later to see what type of connector is being used and how many wires :-/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.