beebee Posted October 6, 2005 Report Share Posted October 6, 2005 Hi. Rev3 250 2000 I was checking the carb settings on my bike and the air screw is set at 3 turns out, can anyone confirm this is standard? Thanks, Quote Link to comment Share on other sites More sharing options...
batrial Posted October 6, 2005 Report Share Posted October 6, 2005 I think that the normal adjustment is of 1.5 turns, +/- 1 half turn. Quote Link to comment Share on other sites More sharing options...
macdaddy Posted October 6, 2005 Report Share Posted October 6, 2005 my 2000 with 145main and 27.5 pilot jet and n7yc plug seems to like it between 2.5 and 3 turns out. I do have the idle set slightly high if someone knows more chime in Quote Link to comment Share on other sites More sharing options...
charliechitlins Posted October 6, 2005 Report Share Posted October 6, 2005 The only answer to "How many turns?" is "As many as it takes." Quote Link to comment Share on other sites More sharing options...
billyt Posted October 7, 2005 Report Share Posted October 7, 2005 Two turns with "V" groove on front of slide. Reduced shroud on needle jet? Smoothed bore! Quote Link to comment Share on other sites More sharing options...
beebee Posted October 7, 2005 Author Report Share Posted October 7, 2005 Many thanks, BB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.