oldgrumps Posted December 23, 2015 Report Share Posted December 23, 2015 Bent my rear brake lever the other day. Also broke the rear lever bushing nut. Ordered one thru lewissport but apparently it's back ordered. Does anyone know of a suitable replacement? 15 Evo 250 Thanks Quote Link to comment Share on other sites More sharing options...
jayboymaui Posted December 23, 2015 Report Share Posted December 23, 2015 can ya find another nut with the same dia/thread count that ya need and grind it down to the appropriate thickness to work? - just a thought - don't know if it will help or not - good luck!!! Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 23, 2015 Report Share Posted December 23, 2015 (edited) RYP shows an RQ pedal.https://secure.rypusa.com/prodpage.cfm?cat_selected=220&product_selected=551&startrow=25\ It`s actually a threaded bushing. It`s the same for all evo`s. The one for a Rev 3 will work too as it`s the same size bearing. Edited December 23, 2015 by lineaway Quote Link to comment Share on other sites More sharing options...
oldgrumps Posted December 23, 2015 Author Report Share Posted December 23, 2015 Thanks just need the nut which is propriety. It serves as the race for the pedal as well as nut and threaded for the 8mm bolt. The parts diagraphm has a picture. I have extra levers already. Old Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 24, 2015 Report Share Posted December 24, 2015 So did you try another dealer yet!!! Quote Link to comment Share on other sites More sharing options...
oldgrumps Posted December 24, 2015 Author Report Share Posted December 24, 2015 Yes 3, most dealers don't actually stock parts, they just carry the usual break away parts(levers, brake pads etc) and maintanence items. They usually order from Betausa. Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 24, 2015 Report Share Posted December 24, 2015 (edited) http://trialstribulations.net/index.php?main_page=product_info&cPath=3_56&products_id=257or I might have one laying around in my van! I did have one in my box, had a little rust so not perfect. Just PM your address if you want it. Edited December 24, 2015 by lineaway Quote Link to comment Share on other sites More sharing options...
huski Posted December 24, 2015 Report Share Posted December 24, 2015 Easy to make one on a lathe.Any small engineering co.could make you one,which might be quicker than waiting for one to be sent to you Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 24, 2015 Report Share Posted December 24, 2015 Shipped, inside the Christmas wrap! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.