yammafan Posted January 1, 2016 Report Share Posted January 1, 2016 As the title says my bike decided to stall when descending a slope. Clutch was out, in 1st gear and the bike seemed to be engine braking nicely, then it died. Started again fine. Any ideas what the typical cause of this is? My initial thought it the tick over may be too low? Quote Link to comment Share on other sites More sharing options...
reggie Posted January 1, 2016 Report Share Posted January 1, 2016 What year is your bike? Quote Link to comment Share on other sites More sharing options...
yammafan Posted January 1, 2016 Author Report Share Posted January 1, 2016 2006 sherco 290 Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 2, 2016 Report Share Posted January 2, 2016 What carb? Quote Link to comment Share on other sites More sharing options...
the addict Posted January 2, 2016 Report Share Posted January 2, 2016 Fuel starvation in the carb I expect, I remember my Rev 3's well. Quote Link to comment Share on other sites More sharing options...
yammafan Posted January 3, 2016 Author Report Share Posted January 3, 2016 oni nou thanks for the info. I'll have a go at setting the tick over next time I'm out and see if it helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.