sy250 Posted October 9, 2005 Report Share Posted October 9, 2005 I have a tlr250r and the petrol from the tank has drained into the sump and mixed with the oil and it had been pouring out of the breather and when I took the filler plug off petrol and oil poured out. Has anybody got any idea on what has gone wrong??? Thanks for reading! Quote Link to comment Share on other sites More sharing options...
jarvis sherco Posted October 9, 2005 Report Share Posted October 9, 2005 sy mate,it sounds like the one of three things it could be.1 the plastick float pettles may have a little hole in it.took some petrol in and stopping the float from shutting the needle valve.2 you could have abit of crap in the needle jet its self.3 your float level could want tweeking up to the right settings.what else could it be?hope this may help you. Quote Link to comment Share on other sites More sharing options...
sy250 Posted October 10, 2005 Author Report Share Posted October 10, 2005 Thankyou very much for the help. Found a hole in the copper float. Quote Link to comment Share on other sites More sharing options...
ace Posted October 19, 2005 Report Share Posted October 19, 2005 Say, SY250, Have you found a replacement for your brass float yet? There is a chap in Canida that can supply them at a good price. I think it must be their age but I have had to replace them on 3 bikes now due to pin-holes in them! Cheers, Ace Quote Link to comment Share on other sites More sharing options...
sy250 Posted October 19, 2005 Author Report Share Posted October 19, 2005 these had been dented. God knows how they got dented. Soldered them. Seem to be fine now. So you have a tlr250r as well??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.