cwill83247 Posted January 26, 2016 Report Share Posted January 26, 2016 Hope someone can help ... To disengage clutch I have to pull it all the way to the grip .. I have adjusted the pin , just can't get it to disengage so can disengage a fingers width so can operate clutch with a finger if that makes sense Quote Link to comment Share on other sites More sharing options...
jfc Posted January 26, 2016 Report Share Posted January 26, 2016 (edited) Sounds like you need to bleed your clutch or you need a master cylinder rebuild kit. You can also measure the clutch pack, you need to lay the bike on its side and remove the clutch cover. Google Jim Snell Gas Gas USA and you should find a video of how to check your clutch and also bleed the system. Click me http://www.trialspartsusa.com/youtube.html Edited January 26, 2016 by jfc Quote Link to comment Share on other sites More sharing options...
baldilocks Posted January 26, 2016 Report Share Posted January 26, 2016 Make sure you have enough free play at the lever Quote Link to comment Share on other sites More sharing options...
taffe Posted January 26, 2016 Report Share Posted January 26, 2016 Yep Jim Snell, redone my clutch following his guidance, best softest clutch in North Queensland. Cheers Taff Quote Link to comment Share on other sites More sharing options...
cwill83247 Posted February 2, 2016 Author Report Share Posted February 2, 2016 Thanks all I will follow Jim snells instructions , that guy is awesome 1 Quote Link to comment Share on other sites More sharing options...
cbutler Posted February 2, 2016 Report Share Posted February 2, 2016 Yes he is and answers emails quickly Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.