trialsertl Posted February 1, 2016 Report Share Posted February 1, 2016 anybody out there know of any fabricators or suppliers (preferably in this country) of an aluminium bash plate for my tlr 200 to replace the horrible tin one ? Quote Link to comment Share on other sites More sharing options...
axulsuv Posted February 1, 2016 Report Share Posted February 1, 2016 what country ?/?? Quote Link to comment Share on other sites More sharing options...
axulsuv Posted February 1, 2016 Report Share Posted February 1, 2016 http://www.bjracing.com/tlr200.html Toughest one I've seen ... Quote Link to comment Share on other sites More sharing options...
trialsertl Posted February 1, 2016 Author Report Share Posted February 1, 2016 oops country being the uk Quote Link to comment Share on other sites More sharing options...
Rollox Posted February 1, 2016 Report Share Posted February 1, 2016 (edited) Hi there, http://www.tytrials.co.uk/trailandtrialsuk/prod_4227672-Replacement-Sump-Guard-TLR250-TLR200-Reflex.html http://www.snezzy.be/index.php http://www.kindsvogel.de1.cc/ I got the alloy cast sump guard from Kivo, it`s like snezzy sells. Good protection for the crankcase covers. Edited February 1, 2016 by rollox Quote Link to comment Share on other sites More sharing options...
lineaway Posted February 1, 2016 Report Share Posted February 1, 2016 The stock looking one sure is nice. But when you are sliding off an obstacle, it`s hard to beat the old flat simple one. The sleek looking one tends to throw you off to the side. That one from ty trials would do, but you could always have one made to your specs. Quote Link to comment Share on other sites More sharing options...
trialsertl Posted February 1, 2016 Author Report Share Posted February 1, 2016 Thanks for all the replies. Now all I've got to do is choose one. Quote Link to comment Share on other sites More sharing options...
axulsuv Posted February 2, 2016 Report Share Posted February 2, 2016 The B&J one is quite robust , and I've seen it slammed over some formidable obstacles , (in practice of course !)... I'm saving for one for my sons reflex, after some real shocks and my spare marzorochi(sp?) fantic forks.... By then he'll apriciate it , for now it's got a modded fantic alli one that wrks better than stock , but doesn't give much protection to the widest points on the engine ... Glenn Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted March 1, 2016 Report Share Posted March 1, 2016 "Well fabricated" but doesn't come near fitting the bike? Send it back. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.