tsiklonaut Posted March 3, 2016 Report Share Posted March 3, 2016 Anyone else a bit dissapointed in the stock narrow and short bashplate? I think OSSA made it too small to save weight. My bike has seen a lot of riding abuse and I found mine has very much worn out a great deal of footpeg lower parts and frame, some serious dents on the suspension linkage too: Plus also I put on a flywheel weight that made my gear lever stick further out w/o protection, hence decided to get a wider and longer bash plate. Thankfully Mark (jkmr1) in this forum has made a laser-cut wider bashplate speciefically for OSSA for a very decent price and sent me one from OZ. Here's vs stock: And now covers up the exposed areas very good, hard to see on the pic but being around it also provides better protection for the linkage: As you can see the gear lever is now protected too (the moving tip is only exposed that move away when you hit the rocks) Another good feature got a nice OSSA logo laser-cut inside too, so when you wheelie everybody will know the special bike you're riding LOL 3 Quote Link to comment Share on other sites More sharing options...
canada280i Posted March 3, 2016 Report Share Posted March 3, 2016 Very nice, mark should advertise these as I think he woul sell a few Quote Link to comment Share on other sites More sharing options...
jsp Posted March 3, 2016 Report Share Posted March 3, 2016 (edited) I'd be interested in knowing the price that's better protection than the std bash plate, am I right in thinking my factory bike came with a slightly bigger one as standard ? Edited March 3, 2016 by jsp Quote Link to comment Share on other sites More sharing options...
tsiklonaut Posted March 3, 2016 Author Report Share Posted March 3, 2016 Mark's offered me cheaper than most aftermarket bashplates, hence I grabed it. He made around 10 of them, I think he has some 6-7 left. If you're interested it's best to PM him I reckon. Quote Link to comment Share on other sites More sharing options...
lotus54 Posted March 3, 2016 Report Share Posted March 3, 2016 (edited) Looks good! I have one of he BTWICE plates, similar to this one. The only issue I've had is catching my MX boot on he outside edge of the plate when shifting up. Most people probably won't have that issue- but I have big feet and not very precise I guess. Edited March 3, 2016 by lotus54 Quote Link to comment Share on other sites More sharing options...
christianmoller Posted March 3, 2016 Report Share Posted March 3, 2016 (edited) Wish sometimes my left foot was a size 14 just to reach the lever . /Christian Edited March 3, 2016 by christianmoller Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.