badger360 Posted March 25, 2016 Report Share Posted March 25, 2016 Does anyone know where i can get the plastic frame trim the clips into the top of the frame cheers Quote Link to comment Share on other sites More sharing options...
canada280i Posted March 25, 2016 Report Share Posted March 25, 2016 Trials tribulations? Or birketts? I have a pair in my garage but not much use to you in Canada Quote Link to comment Share on other sites More sharing options...
christianmoller Posted March 26, 2016 Report Share Posted March 26, 2016 nonstop motoren seems to have them in stock. http://www.nonstopmotoren.com/nl/webshop/product/1084-54-3000040211-frame-kapjes/category_pathway-79 Quote Link to comment Share on other sites More sharing options...
jsp Posted March 29, 2016 Report Share Posted March 29, 2016 (edited) Trick bits do the sorter ones, but I've got these on not from this supplier though. I also used S3 rim tape under the guards to stop the dirt from rubbing the frame http://www.dualsportplus.com/product_p/3000040211.htm Edited March 29, 2016 by jsp Quote Link to comment Share on other sites More sharing options...
telecat Posted March 29, 2016 Report Share Posted March 29, 2016 The Vent things. We lost one pretty early and I bought the last Trials and Tribulations had. Andy At Pennine has a few Italian sources for parts if you can't find them anywhere else. Quote Link to comment Share on other sites More sharing options...
badger360 Posted March 29, 2016 Author Report Share Posted March 29, 2016 Cheers i will give them a try thank you Quote Link to comment Share on other sites More sharing options...
craigrushton Posted March 29, 2016 Report Share Posted March 29, 2016 How do you keep the right hand side one on as mine keeps falling off (pushed off with clutch hose/cable) on right hand turns ???? Maybe i'm doing something wrong ???? But the little ears that sit behind the frame aren't strong enough for the hose/cable push and just comes off ! Quote Link to comment Share on other sites More sharing options...
peterb Posted March 29, 2016 Report Share Posted March 29, 2016 Check to see if the clutch hose runs up over the frame tube directly in front of the top of the radiator, between the two outer frame tubes. You can also cable tie the hose to the square section piece of frame at the headstock, though you shouldn't need to. Also, check if you have the correct plastic piece in the right spot, there are "right" and "left" plastic pieces, the photo at the beginning of this thread shows the plastic piece correctly, the clutch hose routing is shown correctly also. Bye, PeterB. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.