alex_cheswick1989 Posted May 11, 2016 Report Share Posted May 11, 2016 Hi, i stripped the bike to have the frame painted and have built it back together but have no spark. Been searching the internet for pictures or wiring diagrams to make sure the wiring is correct. Is the regulator anything to do with the ignition? Thanks Quote Link to comment Share on other sites More sharing options...
eazyste Posted May 11, 2016 Report Share Posted May 11, 2016 I had a similar issue mate. Make sure the coil is earthed properly, when I had mine powder coated I had to take a bit of the coating back to bear metal to ensure it was earthed right 3 Quote Link to comment Share on other sites More sharing options...
alex_cheswick1989 Posted May 11, 2016 Author Report Share Posted May 11, 2016 thanks, will try that now Quote Link to comment Share on other sites More sharing options...
alex_cheswick1989 Posted May 11, 2016 Author Report Share Posted May 11, 2016 Does this look ok? Is there a place that the regulator needs to be mounted? Just sanded the paint off and its still no spark. Quote Link to comment Share on other sites More sharing options...
doc_d Posted May 11, 2016 Report Share Posted May 11, 2016 (edited) On my '14 the voltage regulator is mounted under the the right ride (if you were sitting on the bike) of the coil on the bottom where the rest of those wires are. That tab on the voltage regulator is actually a heat sink and not a ground so not being mounted would not affect your lack of spark. Mounting it will just help dissipate heat and keep it from getting knocked around. As Eazyste pointed out, both those holes in the frame for the coil need to have the power coating removed so that you have good contact with the coil and with the other wires mounted there. Doc Edited May 11, 2016 by doc_d Quote Link to comment Share on other sites More sharing options...
alex_cheswick1989 Posted May 12, 2016 Author Report Share Posted May 12, 2016 Got it fixed. The Ignition coil had packed in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.