stu3y Posted June 15, 2016 Report Share Posted June 15, 2016 ive been looking in to a harder rear shock spring as ive read the standard spring is suited to riders up to 80KG im around 97KG without helmet and boots! ive seen a couple of shops online do a 10% and 20% stronger spring but no stock. ive found this 1 but no idea if its 10 or 20% has any one used it? http://trialstribulations.net/index.php?main_page=product_info&cPath=34_66&products_id=2388 any other suggestions for a 97KG rider? Quote Link to comment Share on other sites More sharing options...
fastbelly Posted June 15, 2016 Report Share Posted June 15, 2016 Im over 100kilo. Just fitted a heavier spring to my TXTR and initial impressions are very good. Do it you will like it. Quote Link to comment Share on other sites More sharing options...
timdog Posted June 15, 2016 Report Share Posted June 15, 2016 I'm 90kg and recently put 10% stiffer front and rear springs on my Beta, much better, very noticeable on moors etc and suits me better in sections Quote Link to comment Share on other sites More sharing options...
greychapel Posted June 15, 2016 Report Share Posted June 15, 2016 manufacturers spend 1000's shaving 1/2 a kilo off their bikes, then sell em to fat people!......sorry only joking!, seriously is that not what the preload adjustment is for? also I must say the "standard setting" seems to be for quite small people these days Quote Link to comment Share on other sites More sharing options...
madmostin Posted June 15, 2016 Report Share Posted June 15, 2016 Ooh the preload can of worms. Get a spring. Splat shop. Although I've found the single heavy front Spring does fade over time. Quote Link to comment Share on other sites More sharing options...
stu3y Posted June 15, 2016 Author Report Share Posted June 15, 2016 splat shop dont have any springs in stock and when i emailed them today they dont know when they will be in stock anywhere else? Quote Link to comment Share on other sites More sharing options...
redhubuk Posted June 15, 2016 Report Share Posted June 15, 2016 I had heavier front and rear springs on my 2011 Evo from Steve Saunders (SXS) they were purfect for my bulk. Different setup on the Evo 15/16's as front spring just about heavy enough, using an Ohlins rear spring with special custom adapter. Quote Link to comment Share on other sites More sharing options...
dan williams Posted June 17, 2016 Report Share Posted June 17, 2016 (edited) I've got the one size up front and rear on my '13 EVO. Works fine for my 100kg lard ass. Preload is different than spring rate. If you crank the preload up you have to have that much weight on the bike before the suspension moves so you lose all compliance up to that point. Imagine going down a steep hill and the weight transfer moves to the forks. You now have a hard tail in the rear. Very nasty. A heavier spring with less preload will usually have some compliance in the same situation. Oh yeah, got mine from Steve Saunders too. Neat to order a part and get a confirmation email from one of your heros.? Edited June 17, 2016 by dan williams Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.