lineaway Posted July 24, 2016 Report Share Posted July 24, 2016 Coolant for aluminum blocks ok. The fan is worn, lubing won`t help. Make sure the thermo is bypassed and you can push start it with your fingers. Most fans will fit it. It should take closer to 300 ml, but I cannot remember exact amount. A bit of piston slap is most of it. Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted July 24, 2016 Author Report Share Posted July 24, 2016 Thanks for the reply. I am wanting to fit a side stand. Noticed a recess and allen bolts in the swingarm. Anyone got a close up of one fitted. How thick is the bracket ???? thanks whitehillbilly Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted July 24, 2016 Author Report Share Posted July 24, 2016 The top of the front forks, has a knob on the right, which turns. A valve on the left. If I change the fork oil, how do I reset things ???? Thanks. Whitehillbilly Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted July 25, 2016 Author Report Share Posted July 25, 2016 Just had another look and the one on the left isn't a valve. Its a square 10mm nut. whitehillbilly Quote Link to comment Share on other sites More sharing options...
sectionone Posted July 25, 2016 Report Share Posted July 25, 2016 The nut adjusts the spring preload. My Fantic Section had an overheating problem which caused pinging. I found out that the old hoses got soft and the one at the pump on the suction side would squeeze itself shut. I replaced it with a metal gas water heater hose. Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted July 25, 2016 Author Report Share Posted July 25, 2016 (edited) Thanks. Is the gas hose, the stainless steel braided type, and where did you get it from. One of the hoses seems to touch around the exhaust.. To change the fork oil is it simply drain, remove the top nuts, fill and replace nuts, or you you need to Dow something to the two adjusters on the top ???? Whithillbilly Edited July 25, 2016 by whitehillbilly Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted July 25, 2016 Author Report Share Posted July 25, 2016 Can anyone confirm the flywheel puller thread. 32-1.25 has come up on a search. So did 32-1.0 Thinking of getting one made, as my mate around the corner has a lathe. Thanks Whithillbilly Quote Link to comment Share on other sites More sharing options...
northshore0909 Posted July 25, 2016 Report Share Posted July 25, 2016 had a friend make a puller for me, we used 32x1.25 and it worked for my 307. Quote Link to comment Share on other sites More sharing options...
sectionone Posted July 26, 2016 Report Share Posted July 26, 2016 http://www.supplyhouse.com/Brasscraft-CSSC11-36-1-2-ID-5-8-OD-ProCoat-Coated-Stainless-Steel-Gas-Connector-w-3-4-MIP-Fittings-36-Length?gclid=CjwKEAjw8da8BRDssvyH8uPEgnoSJABJmwYohcyapOK-jCyjpiEWNl_vEirQjhIoEMpWrsSpzukZPBoC7dTw_wcB Quote Link to comment Share on other sites More sharing options...
sectionone Posted July 26, 2016 Report Share Posted July 26, 2016 Here's some Section info: https://drive.google.com/file/d/0BxBeU0dgYDXKLXc5SFd4cUZaLVE/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted July 27, 2016 Author Report Share Posted July 27, 2016 Thanks for the info. whb Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted July 29, 2016 Author Report Share Posted July 29, 2016 A coolant question. Is it easy to change, and bleed ???? How much coolant is needed, and what level do you fill it to. Thanks Trial, Sunday and I hope to give it a run. whitehillbilly Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted August 1, 2016 Author Report Share Posted August 1, 2016 (edited) Changed the coolant, 500 mls. Good weekend trial, 40 section day, Fantic ran like a dream, apart from hand starting the Radiator fan, now and again. Took my 10 year old daughter for the first time, and was asked why I wasn't in uniform, like the others. First pic is my uniform. Then it warmed up a bit. Edited August 1, 2016 by whitehillbilly 3 Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted August 23, 2016 Author Report Share Posted August 23, 2016 Flywheel extractor arrived from the UK today, https://www.inmotiontrials.com/product/fantic-300-ignition-flywheel-puller/ Very happy. Great friendly service. whitehillbilly 1 Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted September 2, 2016 Author Report Share Posted September 2, 2016 Got a new Needle and Carby Gasket kit from these guys. Again very helpful. https://www.dellorto.co.uk/ Found the No X71 on the needle. https://www.dellorto.co.uk/shop/dellorto-motorcycle-carburettors-parts/carburettor-parts/phbh-parts/x-type-needle-phbh/ Gasket set https://www.dellorto.co.uk/shop/dellorto-motorcycle-carburettors-parts/carburettor-parts/phbh-parts/phbh-gasket-set/ whitehillbilly Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.