canister Posted July 25, 2016 Report Share Posted July 25, 2016 My bike has Grimica m/c's but all the levers I can find are AJP fitment. Apparently if I remove the sleeves from the AJP fitment levers they will fit the Grimica m/c. Can anyone confirm?. Cheers Quote Link to comment Share on other sites More sharing options...
stpauls Posted July 25, 2016 Report Share Posted July 25, 2016 (edited) Hi Flexible levers? To stop your levers snapping off, you need to adjust them so that when you pull in your front brake or clutch levers, the ball on the end of the lever is about 1.5 inches from the end of the handlebars. Another way of explaining it is to adjust the position of the brake and clutch levers on the handlebars, so that when you extend your index fingers, they only grab the very end of the lever, just behind the ball on the end of the lever. Or, adjust the position to allow for two fingers to grip the levers, rather than having room for all four fingers on the lever. So, you are moving the levers in towards the steering head. Edited July 25, 2016 by stpauls Quote Link to comment Share on other sites More sharing options...
canister Posted July 25, 2016 Author Report Share Posted July 25, 2016 Sounds like a good idea, thank you. Quote Link to comment Share on other sites More sharing options...
madmostin Posted July 25, 2016 Report Share Posted July 25, 2016 Don't crash! Quote Link to comment Share on other sites More sharing options...
canister Posted July 26, 2016 Author Report Share Posted July 26, 2016 That would help. Enduro is my thing but after a terrible accident I bought the trials to improve my technical riding and get fit again. I took it out for the first time last weekend and really enjoyed it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.