owlit Posted August 6, 2016 Report Share Posted August 6, 2016 Could anyone tell me which extractor i.e. which thread will fit the flywheel on my Fantic 200 trial 1984 model. It is possibly around 26mm x 1.5mm although I can't get to measure it properly Quote Link to comment Share on other sites More sharing options...
gasserguy Posted August 6, 2016 Report Share Posted August 6, 2016 Cheap from In Motion, Less than a tenner............ https://www.inmotiontrials.com/product/fantic-200-240-ignition-flywheel-puller/ Quote Link to comment Share on other sites More sharing options...
owlit Posted August 6, 2016 Author Report Share Posted August 6, 2016 Thanks, but as I live in Italy if I knew what thread it was I could get one locally before next weeks holiday. I have got many parts from England which seem to be either unobtainable or just expensive. Even for my Frantic. Extractors are available almost anywhere but not by make but by thread size. Thanks again for the reply. Quote Link to comment Share on other sites More sharing options...
fantic303 Posted August 7, 2016 Report Share Posted August 7, 2016 M27 x 1,25 Quote Link to comment Share on other sites More sharing options...
owlit Posted August 8, 2016 Author Report Share Posted August 8, 2016 Sorry that does'nt fit mine!!! Quote Link to comment Share on other sites More sharing options...
whitehillbilly Posted August 8, 2016 Report Share Posted August 8, 2016 (edited) I rang inmotion today, for a flywheel puller for my Fantic Section. ( 32x1.25mm ) Pete was very helpful. Puller sent a few hrs later. He also gave me advice on where to get carby parts from. Sounds like he has lots of bits for you Fantic 200 owlit. whitehillbilly ( Australia ) Edited August 8, 2016 by whitehillbilly Quote Link to comment Share on other sites More sharing options...
grib Posted August 8, 2016 Report Share Posted August 8, 2016 You need M26 x 1.5, same as a 240. M27 x 1.25 fits Motoplat flywheels. Quote Link to comment Share on other sites More sharing options...
owlit Posted August 9, 2016 Author Report Share Posted August 9, 2016 I did measure it as best I could, (bearing in mind my vernier caliper won't reach and I could only measure the inside measurement with my inside calipers and the thread with thread gauges came up with the 26x1.5. So I think I'll go with this one. Thanks to all I'll let you know. Quote Link to comment Share on other sites More sharing options...
owlit Posted September 1, 2016 Author Report Share Posted September 1, 2016 Thought I better let you all know. it is actually a 26mm x1.5mm thread. Thanks again for all the replies. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.