mechanic Posted August 28, 2016 Report Share Posted August 28, 2016 I currently have a tired old Gasgas JTX 320 ('97 I think) awaiting the installation of new fork seals. I cannot unscrew the upper sleeve on the slider, due to either the two parts being time fused together, or simply not being able to get enough torque to break the threads. I can find no data on this particular fork on the internet. I would normally remove seals by first taking out the dust seal. Remove the circlip above the main seal. Remove the bolt in the bottom of the leg, and then sliding the stantion and slider apart with a brisk tug or two. That is simply not working with the Gasgas leg. Am I missing something? Can someone advise me of the correct procedure if I've missed something and better yet, ink em to a pdf or other document that pertains to the said model. Thanks in anticipation of some help. Paul (Mechanic) Quote Link to comment Share on other sites More sharing options...
chris200 Posted August 29, 2016 Report Share Posted August 29, 2016 That has to be the best answer to a tech question on a forum ever Quote Link to comment Share on other sites More sharing options...
craigh88 Posted August 29, 2016 Report Share Posted August 29, 2016 Jim Snells tutorials are legendary! I owe that man a beer or 6 for the times he's helped me out Thanks for all your effort Jim! Quote Link to comment Share on other sites More sharing options...
mechanic Posted August 30, 2016 Author Report Share Posted August 30, 2016 Thanks for the input folks, it’s been very useful. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.