davide Posted October 1, 2016 Report Share Posted October 1, 2016 Hey guys, I recently was given a fantic clubman 80cc and the clutch does not work. The bike has been sitting in a garage for the past 3 years. The clutch is cable operated and from what i can see the cable and spring works fine. I want to strip the bike to get to the clutch and inspect it. I cant find any manuals or any information on how to do this. I have taken pictures of the engine and if anyone could tell me where to start stripping would really help me out. thanks. Quote Link to comment Share on other sites More sharing options...
davide Posted October 1, 2016 Author Report Share Posted October 1, 2016 that really helped me out thankyou. i stripped out the clutch and found that when i engage the clutch the release bearing only moves out very little. I think this is the problem but i do not know how to adjust it or if i have to strip the clutch lever. I have listed a picture below Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.