drca Posted October 2, 2016 Report Share Posted October 2, 2016 Quick question (2013 TXT Pro): where is the engine breather tube suppose to go? On some other bikes I've had it's routed back in the airbox... Not sure what people do on the Gas Gas. Thanks. Quote Link to comment Share on other sites More sharing options...
reggie Posted October 2, 2016 Report Share Posted October 2, 2016 I am guessing that the bikes that had an engine breather tube going into the air box were 4 stroke bikes. On this bike this is a gearbox breather and only needs to be vented to the atmosphere. I like to cut the ends of these breather hoses on the bias. Quote Link to comment Share on other sites More sharing options...
drca Posted October 2, 2016 Author Report Share Posted October 2, 2016 I am guessing that the bikes that had an engine breather tube going into the air box were 4 stroke bikes. On this bike this is a gearbox breather and only needs to be vented to the atmosphere. I like to cut the ends of these breather hoses on the bias. Great! I guess unless the bike is upside down for and extended amount of time nothing should leak out of there. Thanks. Quote Link to comment Share on other sites More sharing options...
dadof2 Posted October 2, 2016 Report Share Posted October 2, 2016 Exit it high up with the end facing down and cut off at a slant so drips run off. Exit needs to be where washing won't make water get into it. Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted October 3, 2016 Report Share Posted October 3, 2016 Standard routing is down and out through hole in sump tucked behind gear lever, so opposite to dadoffs answer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.