mickmc Posted October 3, 2016 Report Share Posted October 3, 2016 hi, we have a problem with our beta evo 125 2013, it got stuck in gear and won't release at all, has anyone else had any problems,or know how to fix it, assuming its a big strip down? thanks Mick Quote Link to comment Share on other sites More sharing options...
dan williams Posted October 3, 2016 Report Share Posted October 3, 2016 I hate to say it but once something goes funny in the box it's in your best interest to open it up. First though pull off the side cover and check the shifter mechanism. You might get lucky and find the problem is there and not in the gearbox proper. At least I hope that's the case. 2 Quote Link to comment Share on other sites More sharing options...
pauls320 Posted October 3, 2016 Report Share Posted October 3, 2016 Common problem is the weld on shift shaft lets go inside...often after using shift lever for a foot peg or heavy impact. 1 Quote Link to comment Share on other sites More sharing options...
goudrons Posted October 4, 2016 Report Share Posted October 4, 2016 (edited) I think Beta had an issue with some selector mechanisms around this year. Some had trouble with a rivet not pressed in properly into the selector arm, which worked loose and popped out. You might find more info by searching Beta selector fault or rivet. To get at the selector arm the clutch and clutch basket need to come out, then it should just pull free. Edited October 4, 2016 by goudrons 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.