jack007 Posted October 16, 2016 Report Share Posted October 16, 2016 My rear mudguard is broke. Previous owner created a screw on band aid. Anyone know where to go in the US for a replacement ? Quote Link to comment Share on other sites More sharing options...
lineaway Posted October 16, 2016 Report Share Posted October 16, 2016 american beta/ beta usa Quote Link to comment Share on other sites More sharing options...
jack007 Posted October 16, 2016 Author Report Share Posted October 16, 2016 How about the jitsie kit? Anyone tried it? Quote Link to comment Share on other sites More sharing options...
carlos Posted October 19, 2016 Report Share Posted October 19, 2016 What has worked for me is to make the rear fender and plastic airbox lid as one unit (don't forget to put a smaller screw into the back of the airbox) then just use 2 zip ties thru the front bolt holes. Fender will just pop off easily. Make sure to carry at least 4 zip ties on you for spares. Quote Link to comment Share on other sites More sharing options...
jack007 Posted October 20, 2016 Author Report Share Posted October 20, 2016 What has worked for me is to make the rear fender and plastic airbox lid as one unit (don't forget to put a smaller screw into the back of the airbox) then just use 2 zip ties thru the front bolt holes. Fender will just pop off easily. Make sure to carry at least 4 zip ties on you for spares. Are you willing to post a pic? Im more visual and cant really picture what ur describing. I tried to order one from beta usa and they said discountinued... whaat? Its a 2013! Would they do that because the newer plastic fits or am I out of luck? Quote Link to comment Share on other sites More sharing options...
dan williams Posted October 21, 2016 Report Share Posted October 21, 2016 Discontinued? That's pretty strange. 1 Quote Link to comment Share on other sites More sharing options...
carlos Posted October 21, 2016 Report Share Posted October 21, 2016 Are you willing to post a pic? Im more visual and cant really picture what ur describing. I tried to order one from beta usa and they said discountinued... whaat? Its a 2013! Would they do that because the newer plastic fits or am I out of luck? I'm not very good at taking pictures. You need to take the air-box lid and remove the plastic from the bottom of the screw hole. (This allows the fender to sit flush on top of the rear air-box bolt) Then put two self tapping wood screws into the hole-from the back side. These will hold the air-box lid firmly to the fender, making it a single unit. You should also put duct tape over the hole, or fill the top of the hole with a hot glue gun so no water can run into the air-box. The two zip ties allow the fender to pop off in a fall. My 2013 rear fender lasted three years and many tumbles. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.