pete_d Posted January 1, 2017 Report Share Posted January 1, 2017 Appreciate any advice on this.. I have a gasgas jtr 160 was out on it yesterday had great day got home and it had leeked atf all over my van.. cleaned it up and seems to be coming from clutch slave cyclender meets engine.. most of it has probably leaked in to sump guard while riding and then leeked out on my van floor.. topped up and not leaking while in garage so must be when clutch is operated.. is their a gaskit or seal behind this don't want to pull it apart if it's a complex job but if it's easy enough will have a go.. thanks for any info Happy new year! Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 1, 2017 Report Share Posted January 1, 2017 Are you sure it is not coming from the over flow? How much oil did you use? A quick oil change might be easier. The older 160`s were 650cc. Quote Link to comment Share on other sites More sharing options...
pete_d Posted January 1, 2017 Author Report Share Posted January 1, 2017 Hi lineaway.. not had it long when I first got it dropped the oil and put 650 of atf in was showing half way up on sight glass.. the amount that has come out looks like is empty.. where would I find the overflow? Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 1, 2017 Report Share Posted January 1, 2017 The one I have is high on the right center case, right above the clutch. It`s probably easier to see from the left side, just below the carb. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.