iconic558 Posted January 2, 2017 Report Share Posted January 2, 2017 (edited) I run my shocks with the body on the bottom..the non-sexy orientation....with the decals the right way up. Quite often someone will comment that this is incorrect...had it today at the Dabbers from my mate. He told me that his damping went off after a year, but by turning them upside down they had a new lease of life....but anyone in the Anglian area whom knows the rider of a much much modified white tanked red framed TY175, will also know he maybe tight as a ducks chuff but does know his stuff. So I googled the Betor website and according to their bumpf I'm correct. That said as the gas part is just a pressurised bladder over the oil to stop it foaming. I can see that it shouldn't make any difference, but surely the manufacturer would know their onions and their product? I know the argument of unsprung weight but please humour me. Cheers guys, keep the feet up. Edited January 2, 2017 by iconic558 Quote Link to comment Share on other sites More sharing options...
4stroke Posted January 2, 2017 Report Share Posted January 2, 2017 Easy to check, remove one of the shocks, remove the spring and test for damping each way up. Some work both ways and some models don't. Quote Link to comment Share on other sites More sharing options...
pmk Posted January 3, 2017 Report Share Posted January 3, 2017 In general, gas shock with a seperation device, either bladder or floating piston can be positioned at any angle if serviced correctly or has not lost any fluid. Emulsion gas shocks, that do not isolate the the fluid from gas need to be positioned in accordance with what the manufacturers recommends. As for inverting a shock after it has lost fluid can make the bike feel good during the initial part of suspension movement, but as the suspension compresses further, it is likely there will be no damping to slow the bottoming action, and the shocks themselves will be hammered into useless condition. Quote Link to comment Share on other sites More sharing options...
jon v8 Posted January 3, 2017 Report Share Posted January 3, 2017 In my experience it doesn't matter which way up they land in the bin,they work equally badly either way... 3 Quote Link to comment Share on other sites More sharing options...
iconic558 Posted January 4, 2017 Author Report Share Posted January 4, 2017 Cheers guys Quote Link to comment Share on other sites More sharing options...
japes1275 Posted January 8, 2017 Report Share Posted January 8, 2017 I used to have mine the 'right' way up because to me they look right that way. I had a few comments but the thing that made me change them was because I noticed that mud gathered on the top of the damper where the piston rod slides which I thought might wear the seals quicker. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.