jcrumpley Posted March 2, 2017 Report Share Posted March 2, 2017 I have a Beta TR34 that has a sticky clutch on first use. After the bike has sat for a day, when I first start the bike, the clutch will not disengage. The bike will lurch forward when you first put it in gear with the clutch pulled in. After that first lurch, which almost always stalls the motor, I can start it again and all is well. The clutch acts fine other than that. Any ideas on what might cause this? When I physically inspected the clutch by pulling it apart, it looks ok. Quote Link to comment Share on other sites More sharing options...
totty79 Posted March 2, 2017 Report Share Posted March 2, 2017 Take a look at Quote Link to comment Share on other sites More sharing options...
jcrumpley Posted March 2, 2017 Author Report Share Posted March 2, 2017 Thank you for that link. I now have a weekend project. Quote Link to comment Share on other sites More sharing options...
pistol pete Posted March 2, 2017 Report Share Posted March 2, 2017 It took me a couple of hours, works perfectly last weekend. Quote Link to comment Share on other sites More sharing options...
jcrumpley Posted March 6, 2017 Author Report Share Posted March 6, 2017 Got this accomplished over the weekend. Tedious, but well worth the work. Thanks again for pointing me to the fix. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.