Jump to content

Sherpa 340 air box.


340bulltaco
 Share

Recommended Posts

 

 
 
 
 

I had a S/S plate made for mine that was the shape off the Air box hat the rear with 2 welded bolts that fitted perfectly also I had a flat plate on the front with a welded bolt. Makes Life easier. If its a New Air box you will Need to drill the holes for the side panels be careful they need to be correct or the side panels wont fir proper I have a old B box cut up with the original holes I use as a template works a treat. The under the top bracket holes I do last so I drill the side panel holes first then put the rubber bugs in and pop the side panels on then offer the box up in position so I know how fare back or forward the box has to go :thumbup:

  • Like 1
Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...