huski Posted September 26, 2017 Report Share Posted September 26, 2017 Hi all,I've recently got a 2013 300 factory replica.Had to remove the tank,I've noticed the cdi just sits there with nothing to secure it there apart from it sitting on top of the radiator and being held down by the tank.Theres a loop welded to the frame,but if I cable tie to that it sits too high and I can't get the tank on .It looks like the cdi is too big to fit in the space? Any ideas please Quote Link to comment Share on other sites More sharing options...
drca Posted October 9, 2017 Report Share Posted October 9, 2017 On 9/26/2017 at 6:14 AM, huski said: Hi all,I've recently got a 2013 300 factory replica.Had to remove the tank,I've noticed the cdi just sits there with nothing to secure it there apart from it sitting on top of the radiator and being held down by the tank.Theres a loop welded to the frame,but if I cable tie to that it sits too high and I can't get the tank on .It looks like the cdi is too big to fit in the space? Any ideas please That's how my 2013 250 Pro is setup. The wiring loom is pretty messy and packed up under there, but it's mile better than my Scorpa. I've been thinking about try to make a setup similar to the Sherco / Scorpa / Beta with the CDI hanging on the side of the cylinder, but since it's been working fine so far, I haven't had a need for it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.