Jump to content

What do these tubes do? (Evo 4T)


trapezeartist
 Share

Recommended Posts

The carb on the Beta 4T seems to sprout tubes in all directions. Does anyone know what they do, what they should be connected to, and how long they should be?

The one marked in yellow is fuel-in. That's the easy bit.

The one marked blue is a large diameter tube that communicates with the underside of the diaphragm. In my case there is a plastic cap on it, but is that right?

The green one has a short 2-3 inch tube that points downward. Possibly the float chamber breather?

The red one on the left has a very short tube. The red one on the right has a long tube which is blocked off, so seems pretty pointless. They look as if they are possibly intended to connect together in a loop from left to right, but if so, why?

carb.jpg

Link to comment
Share on other sites

 

the green  and two red are breather/overflow pipes and would normally be joined...into a tee piece then a single pipe running down toward the bottom of the shock. The top blue should be capped off....this is used to balance the carb in a multi carb set up

  • Like 1
Link to comment
Share on other sites

 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...