riffraffretro Posted November 2, 2017 Report Share Posted November 2, 2017 Just ordered a shiny new set of footpeg springs for my 247 (InMotion), which look nothing like anything I've fitted before (hooked ends). Having just spent... ahem, far too long trying to fit them, can anyone help/provide a few pics? They're slightly different (left to right side), too. Quote Link to comment Share on other sites More sharing options...
cleanorbust Posted November 2, 2017 Report Share Posted November 2, 2017 (edited) Can't do a photo at the moment but from memory the "straighter" end of spring fits through a small hole in the frame bracket, the other through a hole in the underside of the footrest. The footrest bolt fits through the wound circular part of the spring, there should be a small bush to fit over the bolt there, inside the spring. If you don't get sorted let us know and I'll manage a photo tomorrow. Edited November 2, 2017 by cleanorbust Quote Link to comment Share on other sites More sharing options...
riffraffretro Posted November 2, 2017 Author Report Share Posted November 2, 2017 Thanks Cleanorbust... that explains the issues I experienced earlier. From your description, it seems that the bike has had aftermarket pegs fitted by the PO. I'll likely buy a generic set of springs and run with those. Cheers - I really appreciate your time explaining this. Quote Link to comment Share on other sites More sharing options...
cleanorbust Posted November 2, 2017 Report Share Posted November 2, 2017 Ah yes, if the footrests aren't the originals that would explain your difficulty! Actually the originals aren't too good anyway - much too small and smooth compared with modern ones, so if you can make yours work you'll be better off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.