samwisemcg Posted January 3, 2018 Report Share Posted January 3, 2018 16 hours ago, trapezeartist said: What is the "chain link clutch lightener" mod? There's no bit of chain anywhere in the system so I assume I haven't got it. Actually I find the clutch effort to be pretty good. One finger is a bit hard-going but two fingers is fine, and I don't think that reduces my control on the handlebars significantly. You essentially extend the clutch arm by using a 428 chain link, giving it more leverage and making it slightly easier to pull. You should be able to make it out in this picture. 1 Quote Link to comment Share on other sites More sharing options...
trapezeartist Posted January 3, 2018 Author Report Share Posted January 3, 2018 That seems pretty straightforward. I'll try that. That's a nice looking bike Sam. I see you've got rid of that rather pointless toolbox. I'm tempted, just to make cleaning a little bit easier. I'm never likely to put anything in it. Do you have a protector for the swing arm pivot? The chain is being a little bit unkind to the paint on mine. Quote Link to comment Share on other sites More sharing options...
samwisemcg Posted January 3, 2018 Report Share Posted January 3, 2018 14 minutes ago, trapezeartist said: That seems pretty straightforward. I'll try that. That's a nice looking bike Sam. I see you've got rid of that rather pointless toolbox. I'm tempted, just to make cleaning a little bit easier. I'm never likely to put anything in it. Do you have a protector for the swing arm pivot? The chain is being a little bit unkind to the paint on mine. Thank you, however the bike pictured isn't actually mine. It was just a photo I found on google. Mine (pictured) isn't quite as clean as that. I've never got round to doing the clutch arm mod, mainly because I fitted a set of domino levers and the clutch now feels light enough. Mine has the toolbox, although I've never used it. I've kept it for originality and the fact that complete air filter/toolboxes are hard to find. I don't have anything protecting my swing arm either, just the tensioner underneath the arm. They are great bikes though, I should really get mine out more. 2 Quote Link to comment Share on other sites More sharing options...
trapezeartist Posted January 10, 2018 Author Report Share Posted January 10, 2018 Yours is nothing to be ashamed of, Sam. I'm holding off the clutch lightener at the moment as it will obviously increase lever travel as well and make it a bit more fiddly to get adjusted right. One day, when I have time for experimenting. I'm really tempted to get rid of the toolbox. Originality is the issue, but my bikes not that original anyway and I do like to get rid of things that don't perform any useful function. I really need to sort something out on the chain/swingarm issue. I've protected it with PVC insulating tape for the moment but I'll be lucky if that lasts five minutes. I see you've got a nice clever re-routing of the rear brake rod. That's another point of where on the paint on my bike, so I need to do something. 1 Quote Link to comment Share on other sites More sharing options...
samwisemcg Posted January 11, 2018 Report Share Posted January 11, 2018 It's funny you should mention the brake rod, as it's one of the things I want to change. The previous owner had routed it like that, because if it takes the original path (inside the shock) then it get's pinched by the spring. This is mainly due to the way the falcon shocks have been put in. If they were upside down then it wouldn't be an issue. Quote Link to comment Share on other sites More sharing options...
Julian Taff Posted January 20, 2018 Report Share Posted January 20, 2018 (edited) On 24/12/2017 at 5:26 PM, trapezeartist said: Thatt's an absolute Beaut. i have a 125 version of thi bike and it's lovely to ride. Is this the one which was on ebay recently?? Think the guy gave a helmet and some trousers with it also. If I had had room i would have gone for it. It was listed as all original. It's a stunning wherever you got it from. Good buy :-) Edited January 20, 2018 by Julian Taff Quote Link to comment Share on other sites More sharing options...
trapezeartist Posted January 20, 2018 Author Report Share Posted January 20, 2018 It was advertised on eBay, but not (I think) the one you mention. Quote Link to comment Share on other sites More sharing options...
brewtus Posted March 15, 2018 Report Share Posted March 15, 2018 Well well, a Fantic just joined my Montesa collection yesterday! 5 1 Quote Link to comment Share on other sites More sharing options...
turbofurball Posted March 15, 2018 Report Share Posted March 15, 2018 Looks good! Quote Link to comment Share on other sites More sharing options...
robbiesty175 Posted March 16, 2018 Report Share Posted March 16, 2018 Very nice! Quote Link to comment Share on other sites More sharing options...
topline620 Posted March 23, 2018 Report Share Posted March 23, 2018 Wish I could find one like that in England ! Quote Link to comment Share on other sites More sharing options...
robbiesty175 Posted April 3, 2018 Report Share Posted April 3, 2018 When I saw Brewtus found one, I had to grab this 305! Rode it around the yard today and it's going to be an awesome bike!!! She needs some love, as a former owner thrashed it around pretty hard. I have some grand plans for her... 2 Quote Link to comment Share on other sites More sharing options...
brewtus Posted April 4, 2018 Report Share Posted April 4, 2018 On 4/2/2018 at 7:49 PM, robbiesty175 said: When I saw Brewtus found one, I had to grab this 305! Rode it around the yard today and it's going to be an awesome bike!!! She needs some love, as a former owner thrashed it around pretty hard. I have some grand plans for her... Nice Robbie! Pulled-back bars and dropped levers say it was beat on by a go-fast guy. Looking forward to seeing what you do to that scoot. 2 Quote Link to comment Share on other sites More sharing options...
robbiesty175 Posted April 5, 2018 Report Share Posted April 5, 2018 13 hours ago, brewtus said: Nice Robbie! Pulled-back bars and dropped levers say it was beat on by a go-fast guy. Looking forward to seeing what you do to that scoot. If I'm aboard, it's going S-L-O-W... Thanks for the encouragement and looking forward to a fun ride. 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.