barryb1973 Posted January 25, 2018 Report Share Posted January 25, 2018 Bike started to idle funny bit up and down then overheated and now wont start, its got fuel, spark, carb cleaned, compressions dropped aswell Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 25, 2018 Report Share Posted January 25, 2018 Old fuel. Might of nipped a piston, pull header pipe. Exhaust side show if the rings and piston looks ok. Quote Link to comment Share on other sites More sharing options...
huski Posted January 26, 2018 Report Share Posted January 26, 2018 If it's blown a lot of coolant out check the head gasket (maybe O Rings) also.Are you sure your fuel/ oil mixture was good and it hasn't nipped up as suggested.Was it being used hard just before it stopped,if it was idling it seems unlikely it seized upIf all the above checks out ok I'd suspect the stator Quote Link to comment Share on other sites More sharing options...
barryb1973 Posted January 30, 2018 Author Report Share Posted January 30, 2018 Rings welded to piston Thanks Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 30, 2018 Report Share Posted January 30, 2018 That is too bad. You can always use acid to clean the aluminum off the cylinder. Quote Link to comment Share on other sites More sharing options...
scifi Posted January 31, 2018 Report Share Posted January 31, 2018 Don't know how you would check it now, but did you use neat Petrol instead of the Petr-Oil Mix..? . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.