teuchter Posted February 11, 2018 Report Share Posted February 11, 2018 Hello there, wondered if anyone has had similar problems trying to fit on the engine casing while simultaneously engaging the starter spring under tension, it?s got me beat ! No way can I align the starter return spring under tension whilst trying to fit on the engine cover? Any helps much appreciated? Quote Link to comment Share on other sites More sharing options...
d2w Posted February 11, 2018 Report Share Posted February 11, 2018 Is this possibly helpful? ClutchCoverRookieCadet.pdf 1 Quote Link to comment Share on other sites More sharing options...
arnoux Posted February 12, 2018 Report Share Posted February 12, 2018 You need to undo the M8 bolt on the rear of the crankcase behind the kickstarter. You can access this from the LEFT side of the bike with a long T Bar. It's a gold/brass colour (zinc anodisied) Then refit side case, preload kickstarter by turning it counter clockwise with the kick arm, hold it there, and then turn that bolt fully back home. Then your done. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.