bondy Posted March 4, 2018 Report Share Posted March 4, 2018 Hello guys daft question but witch way dose the Air box rubber to carb go? there's a tab on the rubber that fits on the Air box don't know what that's for iv'e not really had a good look cheers Quote Link to comment Share on other sites More sharing options...
pmk Posted March 5, 2018 Report Share Posted March 5, 2018 The airboot is a TY250Z part carryover onto the Scorpa. Disregard the tab, and ensure the airboot is oriented correctly so the offset does not strain the carb and intake rubber manifold. Also, ensure you do not secure the clamps too tightly. It can crush the airbox spigot or force the airboot off the carb spigot. Either would allow unfiltered air to enter the carb. If it matters, my SY has the tab at approximately straight downward on the airbox spigot. 1 Quote Link to comment Share on other sites More sharing options...
petorius Posted March 5, 2018 Report Share Posted March 5, 2018 Bondy, don't take this the wrong way but this is a long overdue warning from the spelling police. If you continue to use the word dose instead of does you will be taken away and used as part of a trials section. 1 1 Quote Link to comment Share on other sites More sharing options...
bondy Posted March 5, 2018 Author Report Share Posted March 5, 2018 (edited) Ok PMK thanks for the information I'll do just that. Edited March 5, 2018 by bondy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.