aonejames Posted March 11, 2018 Report Share Posted March 11, 2018 (edited) I need help...where can I buy a rod kit? Also need info on piston size the 61.70 in this engine .... not sure if this is standard ? Edited March 11, 2018 by aonejames Quote Link to comment Share on other sites More sharing options...
b40rt Posted March 11, 2018 Report Share Posted March 11, 2018 Have you tried. http://www.motoswm.co.uk/shop/ Quote Link to comment Share on other sites More sharing options...
aonejames Posted March 11, 2018 Author Report Share Posted March 11, 2018 Tomorrow thanks Quote Link to comment Share on other sites More sharing options...
brownie001 Posted March 12, 2018 Report Share Posted March 12, 2018 Hi, the standard bore is 54.0 mm so if the piston you have is 61.7 mm, it's been well overbored. It's not a PeCo (?) modded engine is it ? They used a Suzuki 185 piston to up the CC's to 200 or there abouts. Are there any other obvious engine mods visible ? A sandwich spacer on the timing side for example. Quote Link to comment Share on other sites More sharing options...
motoswm Posted March 12, 2018 Report Share Posted March 12, 2018 (edited) Brownie001....did you not read the post with all the info on the 200 PECO conversions ???? All the parts used were Rotax, the 62mm piston is used in the 175 enduro bikes. They didn't at any time use a piston from a 185 Suzuki, which incidentally is a 64mm bore. I do seem to recall that this piston was used to convert some of the early 125 Fantics. I had in my possession years ago, a Fantic top end with one fitted and a reed valve conversion. Edited March 12, 2018 by motoswm Quote Link to comment Share on other sites More sharing options...
brownie001 Posted March 13, 2018 Report Share Posted March 13, 2018 Hi Martin, I'm afraid I missed the 200 PECO post you mentioned. I'll take a look at it though and give it a thorough read. Don't know where I picked up the Suzuki 185 info from either, all a very long time ago and looks like I have got some wires crossed. Quote Link to comment Share on other sites More sharing options...
brownie001 Posted March 14, 2018 Report Share Posted March 14, 2018 Great article packed with useful information. Thanks for the tip Martin. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.