section swept Posted March 19, 2018 Report Share Posted March 19, 2018 On 17/03/2018 at 8:42 AM, 2stroke4stroke said: I'm not a gambler, never having placed a personal bet in a bookies, so wouldn't be inclined to take a punt on a stator from a breaker. At least a professionally sorted one will work, and for a reasonable time. Mr Allen is not known for selling duff parts. Quote Link to comment Share on other sites More sharing options...
section swept Posted March 19, 2018 Report Share Posted March 19, 2018 These may sound daft, but due to the running backwards, is the flywheel hub fixed to the flywheel, ie riveted. Has the crankshaft half spun in the crankshaft web. Not sure here if the crankshaft is an interference/ splined fit to the crank web or machined as one? Or was Merlin the magician annoyed at the noise and put a spell on the fiendish machine.?? Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted March 19, 2018 Report Share Posted March 19, 2018 3 hours ago, section swept said: Mr Allen is not known for selling duff parts. My comments were not directed at any particular breaker but how could anyone stripping a bike know if the ignition worked properly once the bike had been running for an hour or so? Problems often only appear when the motor is fully hot. The breaker is (honestly) gambling as much as the buyer. Quote Link to comment Share on other sites More sharing options...
section swept Posted March 19, 2018 Report Share Posted March 19, 2018 4 hours ago, 2stroke4stroke said: My comments were not directed at any particular breaker but how could anyone stripping a bike know if the ignition worked properly once the bike had been running for an hour or so? Problems often only appear when the motor is fully hot. The breaker is (honestly) gambling as much as the buyer. Agree entirely. Except some breakers take apart already running bikes as that’s a more lucrative way to make money!?? Quote Link to comment Share on other sites More sharing options...
bikestat Posted March 19, 2018 Report Share Posted March 19, 2018 7 hours ago, section swept said: Mr Allen is not known for selling duff parts. 2 minutes ago, section swept said: Agree entirely. Except some breakers take apart already running bikes as that’s a more lucrative way to make money!?? 3 minutes ago, section swept said: Agree entirely. Except some breakers take apart already running bikes as that’s a more lucrative way to make money!?? agree i,ve known richard since the late seventies and never had or heard of any problems with him . Quote Link to comment Share on other sites More sharing options...
Danieljohn Posted March 26, 2018 Author Report Share Posted March 26, 2018 Hi guys bit of an update I’ve checked cleaned carb, reeds, exhaust I purchased a new coil a new plug, cap and Ht lead woodruff key and timing is ok I’ve now sent my stator and cdi unit to Bradford ignitions in Cornwall they specialise in beta techno electronics and many others but they do list this make and model on Thair website (motoplat) will let you know what they say is wrong with my Elecs they have the equipment and knowledge to bench test these. Quote Link to comment Share on other sites More sharing options...
Danieljohn Posted May 17, 2018 Author Report Share Posted May 17, 2018 Hi guys sorry it’s been a while I’ve had my stator rewound and all my Elecs tested at Bradford ignitions it turned out to be the cdi unit does anyone know where I could source 1 or get this repaired thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.