Buckyten Posted June 23, 2018 Report Share Posted June 23, 2018 Trying to install a simple two wire KS one wire from switch went to ground and the other is a mystery. The other wire ? There is a terminal block that has 8 terminals with 5 being used 1 ground whiteon right side then black going to coil. then green, black, yellow all on left side of block. Those 3 are from wire loom from mag/eng.. So where does my other wire from KS go to and how????? Thanks for helping. It must be simple right?!!! Quote Link to comment Share on other sites More sharing options...
b40rt Posted June 23, 2018 Report Share Posted June 23, 2018 Probably connect to black going to coil. Quote Link to comment Share on other sites More sharing options...
feetupfun Posted June 23, 2018 Report Share Posted June 23, 2018 yes kill switch goes between coil wire and earth. Kill switch should be the "normally open" type ie it should be open circuit in the "run" position and closed circuit when activated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.