T5avs1 Posted July 24, 2018 Report Share Posted July 24, 2018 Hi is there two drain plugs underneath the ty250a? one pretty much in centre of casing and one to the side underneath gear selector, or is the one underneath the gear selector something different? Thanks guys Quote Link to comment Share on other sites More sharing options...
T5avs1 Posted July 25, 2018 Author Report Share Posted July 25, 2018 There is nothing in it though just the bolt? Quote Link to comment Share on other sites More sharing options...
T5avs1 Posted July 25, 2018 Author Report Share Posted July 25, 2018 Should there be a spring or something in it then? It just has a hollow bolt in the hole and that's it. Inside looks like this Quote Link to comment Share on other sites More sharing options...
T5avs1 Posted July 25, 2018 Author Report Share Posted July 25, 2018 Quote Link to comment Share on other sites More sharing options...
guy53 Posted July 25, 2018 Report Share Posted July 25, 2018 Look at the parts list avalable online, you will see what is missing Guy Quote Link to comment Share on other sites More sharing options...
T5avs1 Posted July 25, 2018 Author Report Share Posted July 25, 2018 I just ordered it thanks guy is it just a case of putting it all back in the hole and screwing it back up or does it need setting or anything? Thanks Quote Link to comment Share on other sites More sharing options...
guy53 Posted July 25, 2018 Report Share Posted July 25, 2018 Just screw it in Guy Quote Link to comment Share on other sites More sharing options...
tony27 Posted July 26, 2018 Report Share Posted July 26, 2018 Lucky you asked about that bolt, the plunger is for keeping the shift drum stopped at each gear rather than just stopping in any random spot. Strange that the spring & plunger were missing Quote Link to comment Share on other sites More sharing options...
T5avs1 Posted July 26, 2018 Author Report Share Posted July 26, 2018 Hi Tony can you just put it straight back in at the placement it is at the moment in the picture? Quote Link to comment Share on other sites More sharing options...
tony27 Posted July 26, 2018 Report Share Posted July 26, 2018 Pretty sure you should be okay fitting it as it is at the moment, if you were you move the gearlever while looking through the hole you would see the cam detail that the plunger pushes into. The gearchange will be more positive after you get the plunger & spring fitted 1 Quote Link to comment Share on other sites More sharing options...
feetupfun Posted July 26, 2018 Report Share Posted July 26, 2018 1 hour ago, T5avs1 said: Hi Tony can you just put it straight back in at the placement it is at the moment in the picture? You can put it back in no matter where the shift drum is sitting. All that thing does is hold the shift drum in the positions that suit where each gear is correctly engaged. Your photo appears to show a dip where the plunger goes. If there is a dip there it means that the drum position is right to have the gearbox in a gear. If there was a bump in line with where the plunger goes, the shift drum would either rotate as you fit the plunger until the plunger goes into a dip, or the spring under the plunger would compress with the shift drum staying still. In the second case as soon as you do anything that moves the gearbox shaft, the drum will rotate and the plunger will slide into a dip and stay there until you shift gears with the shift mechanism. Quote Link to comment Share on other sites More sharing options...
T5avs1 Posted July 26, 2018 Author Report Share Posted July 26, 2018 Thanks for that reply i shall put it straight in then once it has arrived in the post thanks again for your help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.