hectorwilson Posted August 1, 2018 Report Share Posted August 1, 2018 I have a 2016 Sherco 125 and the clutch is rock solid, it’s impossible to pull it in. I have bled the system and replaced the hydraulic fluid, I have tightened the clutch basket nut and I have replaced the master cylinder and still I have the problem, any help would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Rapidroy Posted August 1, 2018 Report Share Posted August 1, 2018 I had that before with my sons bike the engine breather was blocked Quote Link to comment Share on other sites More sharing options...
hectorwilson Posted August 1, 2018 Author Report Share Posted August 1, 2018 rapidroy thanks will go and have a look, where is it and how do i unblock it? Quote Link to comment Share on other sites More sharing options...
dan williams Posted August 1, 2018 Report Share Posted August 1, 2018 (edited) Grab the clutch lever and open the bleeder on the engine case. If fluid comes out and the lever compresses the master cylinder and hose are good and you have a mechanical problem in the clutch assembly/slave cylinder. This is usually a problem caused by incorrect assembly of the clutch and/or actuation mechanism. http://www.sherco.com/tl_files/core/pdf/spare_parts/WEB-Spare_parts_FACTORY_2016.pdf Edited August 1, 2018 by dan williams Quote Link to comment Share on other sites More sharing options...
copemech Posted August 1, 2018 Report Share Posted August 1, 2018 Is the clutch actually disenguaged? Quote Link to comment Share on other sites More sharing options...
Rapidroy Posted August 2, 2018 Report Share Posted August 2, 2018 rubber tube from crank casing to swingarm what happen was the pressure had build up making the clutch lever hard if you leave the bike stopped for 10 minutes does the clutch level work ? Quote Link to comment Share on other sites More sharing options...
hectorwilson Posted August 3, 2018 Author Report Share Posted August 3, 2018 20 hours ago, Rapidroy said: rubber tube from crank casing to swingarm what happen was the pressure had build up making the clutch lever hard if you leave the bike stopped for 10 minutes does the clutch level work ? no, i sat it overnight and the clutch was the same the next morning, i cleaned the breather hose and sucked all the gunk out of the port, still solid Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.