betaboy100 Posted September 29, 2018 Report Share Posted September 29, 2018 Hi guys, iv noticed when landing of anyone more than 4ft or so my bike seems to 'bottom out'. Is this down to suspension settings being wrong or my technique not being right? Quote Link to comment Share on other sites More sharing options...
jonnyc21 Posted September 30, 2018 Report Share Posted September 30, 2018 Could be one, or the other, or both. However, I find more often than not when I would bottom out in the past it was my technique more than the suspension. If you are say 220 lbs (100kg / 16 stone) heaver springs might help but still technique is more important most of the time. Hope that helps. Quote Link to comment Share on other sites More sharing options...
betaboy100 Posted September 30, 2018 Author Report Share Posted September 30, 2018 Im around 11/12 stone so dont think i need the heavier spring. Think some work on technique is needed haha. Thanks for the reply. Quote Link to comment Share on other sites More sharing options...
section swept Posted September 30, 2018 Report Share Posted September 30, 2018 Even though your bike is relatively modern it is none the less 7 years old and springs do go weak, when considering what they are put through. Wish I could get back to weighing my 11/12 stone, trying to get under 15, so imagine any bikes springing and the punishment it’s getting. If you can afford it replace the springs just to get the ride height closer to original with fresh oil in the forks, the rear unit may be too expensive or you might get it rebuilt. There will be many riders who will tell you to just get on and ride, but you are noticing the bottoming out and can at least try to modify or improve the technique of body weight transfer, but with new springs you might be surprised at the difference in your bike and it’s response to your input. Hope you get good results? Quote Link to comment Share on other sites More sharing options...
betaboy100 Posted September 30, 2018 Author Report Share Posted September 30, 2018 Thanks for the reply mate. Iv got my eyes on the 2019 gasgas so gonna hold off on any expensive jobs on my current bike unless i decide to keep it. Quote Link to comment Share on other sites More sharing options...
jrsunt Posted September 30, 2018 Report Share Posted September 30, 2018 If your suspension doesn't bottom out on the big hits, then it's too hard. It shouldn't be far off bottoming out under normal conditions. 3 Quote Link to comment Share on other sites More sharing options...
nzralphy Posted December 2, 2018 Report Share Posted December 2, 2018 Stood on your bike and ready to ride you should have 1/3 suspension sag front and back. Try to be accurate with this. Springs get a hammering so check every 6mth. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.