martinh Posted January 4, 2006 Report Share Posted January 4, 2006 I have just got a used 05 290 Sherco, and the previous owner has put a set of Renthal bars on there that are too wide, and the bend itsn't right for me. Does anyone know what renthals most closely match the width and bend of the standard Sherco bars, as I had standard bars on my 04 290 and really liked them. Also, are the Renthals ones cheaper than the standard Sherco ones? If not, is there any reason to go for the Renthal ones over standard? Quote Link to comment Share on other sites More sharing options...
shercool Posted January 4, 2006 Report Share Posted January 4, 2006 I put some Renthals on my Sherco not long after getting it, i felt like the original Sherco bars came back towards me, the Renthals just seem comfier to use for me. Quote Link to comment Share on other sites More sharing options...
old skool Posted January 4, 2006 Report Share Posted January 4, 2006 standard sherco bars bend pretty easily Quote Link to comment Share on other sites More sharing options...
charliechitlins Posted January 4, 2006 Report Share Posted January 4, 2006 Nice job!! I have found the stock Sherco bars to be very durable and considerably less expensive than Renthal. Quote Link to comment Share on other sites More sharing options...
sherpa Posted January 5, 2006 Report Share Posted January 5, 2006 I have found the Kuroyama Renthals to be pretty close to the sherco bend. The Sherco stock bars are nice but for a heavy guy like me they seem to flex on the hard landings. I found the Renthals give me more feeling of stability with no flex. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.