ossatr250i Posted November 2, 2018 Report Share Posted November 2, 2018 I have a question regarding spark arrestors for the current Sherco’s. I just picked up one from RYP and Discovered it’s held in place with 2 wood screws??? It’s a 2 piece design, an adapter screws to the plastic cap at the end of the silencer then you clamp the spark arrestor over that. I believe Spanish fly makes one...need to do some more research. thanks, phil. Quote Link to comment Share on other sites More sharing options...
turbofurball Posted November 2, 2018 Report Share Posted November 2, 2018 Is it one of these? When you say wood screw, do you mean a self-tapper? If so it'll be fine, I've had stainless self-tappers in exhausts before and no problems have occured! The Spanish Fly ones are HERE, and looks nicely finished Quote Link to comment Share on other sites More sharing options...
ossatr250i Posted November 6, 2018 Author Report Share Posted November 6, 2018 Spanish fly does make one. It is installed from the back of the end cap and is held in place with orings and a flange. It cannot be removed without takes the end cap off, so cleaning will be more of an issue then the RYP spark arrestor but the install is very clean, and no drilling holes in the end cap. Price is about 85$, I’m going to order one today. Phil. Quote Link to comment Share on other sites More sharing options...
turbofurball Posted November 6, 2018 Report Share Posted November 6, 2018 You need to remove the end cap to change the exhaust packing regularly anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.