Jump to content

Beta Evo 80cc Flywheel 2017


Ste_g88
 Share

Recommended Posts

 

 
7 hours ago, lineaway said:

 You might show location. Have you tried your dealer?

 Just curious why you would need one on such a new bike?

Just bought the bike for my lad and 2 week later and it now sounds like bearings have failed on the crank...gutted to be honest.. can't seem to find a pulley for it 

Link to comment
Share on other sites

 
 
6 hours ago, Ste_g88 said:

Just bought the bike for my lad and 2 week later and it now sounds like bearings have failed on the crank...gutted to be honest.. can't seem to find a pulley for it. 

Video with sound would be good and £34 for a simple puller is a bit steep. Are you sure the mains have gone, can you move the crank about from side to side by pulling on the flywheel? 

Link to comment
Share on other sites

 
 

Ok well I've ordered a puller. Basically what happened is I got the bike out and the kick start had locked up..it freed off by pushing the bike back and forth. Then once I started the bike up it sounded like an old tractor so turned it straight off. The bike was fine when it was put away so I've really no idea what caused this. I'll keep yas updated though.

 

Thanks for the advise etc

Link to comment
Share on other sites

 
2 hours ago, crashmonkey said:

Quite possibly the rivets on the side of the flywheel have worked loose. Rattles like a pig and sounds like the mains have gone. Hammer will fix it.

 

Hi there, is this quite common as my 16 Rev 80 feels like it's about to seize when it gets really hot ? Let it cool and it runs fine.

Cheers

Link to comment
Share on other sites

 
15 hours ago, Ste_g88 said:

Ok well I've ordered a puller. Basically what happened is I got the bike out and the kick start had locked up..it freed off by pushing the bike back and forth. Then once I started the bike up it sounded like an old tractor so turned it straight off. The bike was fine when it was put away so I've really no idea what caused this. I'll keep yas updated though.

 

Thanks for the advise etc

Check those 6 rivets that attach the 'outer flywheel' to the centre boss - hopefully an easy fix - good luck!

 

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...