nigel dabster Posted December 11, 2018 Report Share Posted December 11, 2018 On 12/8/2018 at 4:16 PM, oni nou said: That's lineaway That's lineaway Lineaway is Mark Cope, commonly called copey. Quote Link to comment Share on other sites More sharing options...
oni nou Posted December 11, 2018 Report Share Posted December 11, 2018 1 minute ago, nigel dabster said: Lineaway is Mark Cope, commonly called copey. But only to those in the secret society........I didn't realise you were all sat in a bar together as chums using the same laptop and here I am on my own............ I'm roneree .......sew roneree ................... Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted December 11, 2018 Report Share Posted December 11, 2018 4 minutes ago, oni nou said: But only to those in the secret society........I didn't realise you were all sat in a bar together as chums using the same laptop and here I am on my own............ I'm roneree .......sew roneree ................... Not sure what you're on about, again. Mark like me has been on here for many years and replies on things he has experience of. Unlike you... Quote Link to comment Share on other sites More sharing options...
oni nou Posted December 11, 2018 Report Share Posted December 11, 2018 Just now, nigel dabster said: Not sure what you're on about, again. Mark like me has been on here for many years and replies on things he has experience of. Unlike you... You are not quick witted enough to know or work out what I am on about. Quote Link to comment Share on other sites More sharing options...
oni nou Posted December 11, 2018 Report Share Posted December 11, 2018 1 hour ago, nigel dabster said: Not sure what you're on about, again. Mark like me has been on here for many years and replies on things he has experience of. Unlike you... Am I coming across to your public as being more knowledgeable than you and making you feel marginalised .......is that what all this trolling me is about . Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 11, 2018 Report Share Posted December 11, 2018 Copemech is Mark Cope a proffesional auto mechanic. I am Bob Rowland, slave to trials for 48 years. Quote Link to comment Share on other sites More sharing options...
oni nou Posted December 11, 2018 Report Share Posted December 11, 2018 (edited) lineaway .........Copey copemech ................Liney Keep digging .....or have a few more werthers Edited December 11, 2018 by oni nou Quote Link to comment Share on other sites More sharing options...
Jeff B Posted December 12, 2018 Report Share Posted December 12, 2018 If a bike is jetted for sea level.....would you not lean out the jetting for higher elevation? Higher elevation=less air? It was stated "if your current idle jet is a 35 then you might try a 45". I haven't worked with a Dellorto much. I have a 17 Contact 250. It was a little lean on the pilot. Went up 2 sizes for winter and 1 size up for summer. I think the bigger the number , the bigger the jet...Right? Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 12, 2018 Report Share Posted December 12, 2018 (edited) It has to do with atmospheric pressure AND the bikes come from the factory usually too lean on purpose for emission standards. Edited December 12, 2018 by lineaway Quote Link to comment Share on other sites More sharing options...
Jeff B Posted December 12, 2018 Report Share Posted December 12, 2018 I found that out on my bike. It runs great now. But, the person from Colorado purchased a bike jetted for sea level. He needs jetting for his elevation. It was suggested he go to bigger jetting? Is this correct is what I am wondering. Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 12, 2018 Report Share Posted December 12, 2018 If you looked at my post, he needs a larger pilot and slightly leaner than stock on the main. Remember we are talking a 200, which was not a full 200cc. Quote Link to comment Share on other sites More sharing options...
Jeff B Posted December 13, 2018 Report Share Posted December 13, 2018 If you looked at my post, I was not referring to your post. The quote is from Section Swept post. He stated that it is recommended to go up in main jet sizes 15 % to start. I was asking if this is correct. My jetting experience has been to not go richer, but leaner, because of less air density at higher elevation. Is Section Swept correct? I did not see his current jetting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.