Colm Posted December 9, 2018 Report Share Posted December 9, 2018 (edited) Hi , I’m having endless trouble with my 2014 Sherco st 300 formula front oem brakes . In a nutshell they are pure crap . I’ve stripped and meticulously cleaned , and light sanding of pistons ( which one was only working ) no more sticking , but still the same spongy lever and no better ( and properly bled ) is the ms the problem, anyone here have the same issue thanks Edited December 9, 2018 by Colm Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 9, 2018 Report Share Posted December 9, 2018 During that time, riders would keep the old AJP`s and put the Formula`s on the old bikes. The best fix is find a used set of AJP`s. I am running 2005 AJP`s on my `16 as the Brak Tec`s are marginally better. Quote Link to comment Share on other sites More sharing options...
maxwell smart Posted December 9, 2018 Report Share Posted December 9, 2018 Hello Colm, I agree about the braktec front master cylinder. My 2015 cota 260 wont hold pressure either. I have wanted to do the honda motocross bike master cylinder mod like the repsol team uses for a while now. I wish it was easier to get the correct line for the mod. I purchased a line from spain and was sent something that was not compatible , so I threw it the rubbish bin and gave up. happy holidays Maxwell Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.