imexian Posted January 5, 2019 Report Share Posted January 5, 2019 (edited) Just got xui full race Kevlar clutch kit with the 4 plates, it’s showing a 30 degree machining on the clutch pack operating fingers? Is this at the clutch pack end? Looks like it? does this entail going to a machine shop to have done? i thought it was at the other end of finger, bolt end, so I could just grind or file off? anyone got this set up to advise? No mention of this at all on website from shop or xui website, v f##d off...... Looks like I’m fubaared for this weekend..........this was supposed to be a drop in fix!! ?? Edited January 5, 2019 by imexian Quote Link to comment Share on other sites More sharing options...
heffergm Posted January 5, 2019 Report Share Posted January 5, 2019 The Xiu fingers are a drop in replacement. You don't need to do anything to them. Quote Link to comment Share on other sites More sharing options...
imexian Posted January 5, 2019 Author Report Share Posted January 5, 2019 It’s not the xui fingers I have but the std ones bro Quote Link to comment Share on other sites More sharing options...
heffergm Posted January 5, 2019 Report Share Posted January 5, 2019 Ok bro. Good luck. Quote Link to comment Share on other sites More sharing options...
huski Posted January 5, 2019 Report Share Posted January 5, 2019 Fit it as is,see if it works,you've nothing to lose Quote Link to comment Share on other sites More sharing options...
imexian Posted January 5, 2019 Author Report Share Posted January 5, 2019 Don’t think will work, as pack will be to high! if I’d known I could have had this already done.... Quote Link to comment Share on other sites More sharing options...
heffergm Posted January 5, 2019 Report Share Posted January 5, 2019 (edited) I still don't understand the problem. The only difference between the Xiu fingers and the stock fingers is that they're cut out more for oil flow. The way they rest between the pack and the pressure plate is the same. There's no reason the Xiu fingers and stock wouldn't be interchangeable between packs. Edited January 5, 2019 by heffergm Quote Link to comment Share on other sites More sharing options...
imexian Posted January 5, 2019 Author Report Share Posted January 5, 2019 (edited) That’s what I thought , remember though this is the four friction plate set, it gives instructions for this mod in the box! Edited January 5, 2019 by imexian Quote Link to comment Share on other sites More sharing options...
heffergm Posted January 5, 2019 Report Share Posted January 5, 2019 I've put Xiu plates on my last two bikes. First time I've seen that. Quote Link to comment Share on other sites More sharing options...
imexian Posted January 5, 2019 Author Report Share Posted January 5, 2019 (edited) Was that the Kevlar plates only? this comes with 4 frictions and 3 steels Edited January 5, 2019 by imexian Quote Link to comment Share on other sites More sharing options...
heffergm Posted January 5, 2019 Report Share Posted January 5, 2019 I've used the Xiu fingers as well. No modifications to anything. Quote Link to comment Share on other sites More sharing options...
imexian Posted January 5, 2019 Author Report Share Posted January 5, 2019 Is that with the 4 Kevlar plates though? Quote Link to comment Share on other sites More sharing options...
canada280i Posted January 6, 2019 Report Share Posted January 6, 2019 That just seems stupid of Xiu to sell the pack without the correct fingers, they should have included them and charged a little more to make the kit a straight bolt on mod Quote Link to comment Share on other sites More sharing options...
imexian Posted January 6, 2019 Author Report Share Posted January 6, 2019 (edited) The stuff is expensive enough so now need to cost in for some machining! looked on their website and it’s says straight swap no farting about with it! ive now got no bike this weekend....very nobbed off... typical trials related, let the rider develop the product first.... this is from Xui website blerb notice the “assembled on stock clutch, and rest of components” Technical Info: This special kit, made just for GG engines, is designed to offer the maximum torque control of your engine. Using very special steel plates, 1,00mm, made by wire cutting. And combined with our Kevlar compound pads. Can be assembled on the original stock clutch hub, and rest of components. Due using more discs, this kit, is able to transfer much more torque and heat and also make easier to cool the discs through higher oil flow. Edited January 6, 2019 by imexian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.