al_orange Posted March 11, 2019 Report Share Posted March 11, 2019 Really enjoying the handling of the TRS 250 RR. Has lifted my confidence and is flattering to ride, in the main. However, it's very snappy off the bottom (as expected), even with a slow throttle. I'm running a 9T front which does make the gears more like my old Beta but it's very aggressive in low traction situations (seems harder to get traction than my Rev3 was) so I wonder if anyone would suggest running the standard 10T? I had a look at other TRS bikes and some are on 9T some are on 10T. I'm just starting to ride clubman sections, if that matters. I know there's a lot of variables at play but would like input on just the gearing side of things. Thanks, Quote Link to comment Share on other sites More sharing options...
gasserguy Posted March 11, 2019 Report Share Posted March 11, 2019 10T front and low comp head. BiN the 9T.... Made mine miles better. https://www.saundersextremesports.com/sxs-shop/trrs-low-compression-head-insert/ 1 Quote Link to comment Share on other sites More sharing options...
lineaway Posted March 11, 2019 Report Share Posted March 11, 2019 My son actually has a 42T coming today. We are trying it for a whole other reason. To bring 2nd gear down just a touch for splatters. Quote Link to comment Share on other sites More sharing options...
al_orange Posted March 11, 2019 Author Report Share Posted March 11, 2019 36 minutes ago, lineaway said: My son actually has a 42T coming today. We are trying it for a whole other reason. To bring 2nd gear down just a touch for splatters. Lol.. well I'm trying to avoid the unintentional splatters so I'll leave that one alone. I did think going to 10/42 could be a compromise but I don't know if the chain is long enough. Quote Link to comment Share on other sites More sharing options...
al_orange Posted March 11, 2019 Author Report Share Posted March 11, 2019 2 hours ago, gasserguy said: 10T front and low comp head. BiN the 9T.... Made mine miles better. https://www.saundersextremesports.com/sxs-shop/trrs-low-compression-head-insert/ What issues were you having? Quote Link to comment Share on other sites More sharing options...
baldilocks Posted March 11, 2019 Report Share Posted March 11, 2019 Gas gas used to advise not to run a 9t sprocket with a 520 Chain as it's too tight a corner for the chain so you have high wear and lose power. Std gearing is 10/40 but if you went 10/44 thats pretty much the same gearing. I find first too low on my 280 and second a little high. On my 17 I ran 10/38 as an experiment and liked it, so next set of chain and sprockets i went 11/42. most sections were then done in first and that suits me for rocky streams which is predominantly what I ride. 2 Quote Link to comment Share on other sites More sharing options...
anachronism Posted July 1, 2019 Report Share Posted July 1, 2019 Anyone had a chance to figure out if the smaller spline on the 18 & up RRs is the same as any other existing spline? Not seeing anything after market except "DOES NOT fit 18 & up RRs". Would like to try an 11 front/bigger rear for different ratios & longer chain/sprocket life. Quote Link to comment Share on other sites More sharing options...
lineaway Posted July 1, 2019 Report Share Posted July 1, 2019 No one is going to make an 11. An 11 and 44 is the same as stock. Quit worrying about sprocket wear, unless you are riding it to work. I have ridden with a 9 on both gasser`s and Beta`s for years. (There is no reason to put a 9 on a TRS.) Quite a range from 41 to 48 easily available for the rear. being stock gearing is a little fast. 1 Quote Link to comment Share on other sites More sharing options...
baldilocks Posted July 2, 2019 Report Share Posted July 2, 2019 (edited) Try scorpa sy 250 sprocket. It fits but had a fraction more slack on the spline, however it was a used sprocket I tried. I haven't ridden with it on yet Edited July 2, 2019 by baldilocks Quote Link to comment Share on other sites More sharing options...
taff_d Posted July 2, 2019 Report Share Posted July 2, 2019 Just tried 10/42 at the weekend and I liked it, but it was on an old stretched chain can't fit that gearing on a new chain you have to end up using 1/2 links and I don't like doing that. So I'm settling on 10/41, slow action throttle, LC head insert and Carbon Tech reeds ? Quote Link to comment Share on other sites More sharing options...
taff_d Posted July 2, 2019 Report Share Posted July 2, 2019 (edited) On 7/1/2019 at 7:31 PM, anachronism said: Anyone had a chance to figure out if the smaller spline on the 18 & up RRs is the same as any other existing spline? Not seeing anything after market except "DOES NOT fit 18 & up RRs". Would like to try an 11 front/bigger rear for different ratios & longer chain/sprocket life. This is what you want This was supplied to me by me local TRS dealer so I presume it's correct not fitted it yet ? Edited July 2, 2019 by taff_d Quote Link to comment Share on other sites More sharing options...
anachronism Posted July 2, 2019 Report Share Posted July 2, 2019 @taff_d: I hope that is correct. That is 2010 & previous Scorpa SY250 available from Talon in 10 to 14. Please post up when you get a chance to try it. Quote Link to comment Share on other sites More sharing options...
baldilocks Posted July 3, 2019 Report Share Posted July 3, 2019 That's the same sprocket reference I have , we have the answer ? Quote Link to comment Share on other sites More sharing options...
taff_d Posted July 3, 2019 Report Share Posted July 3, 2019 It fits ? Quote Link to comment Share on other sites More sharing options...
anachronism Posted July 3, 2019 Report Share Posted July 3, 2019 Thank you @baldilocks & @taff_d ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.