Davidstewart123 Posted April 12, 2019 Report Share Posted April 12, 2019 Cleaned carb on bike then started it it revved up then stopped now won't turn over . What you think has happened? Quote Link to comment Share on other sites More sharing options...
b40rt Posted April 12, 2019 Report Share Posted April 12, 2019 Revved a bit, or screamed its nuts off ? Take the plug out and try again. Quote Link to comment Share on other sites More sharing options...
Davidstewart123 Posted April 12, 2019 Author Report Share Posted April 12, 2019 Screamed it's nuts off lol Quote Link to comment Share on other sites More sharing options...
dan williams Posted April 12, 2019 Report Share Posted April 12, 2019 Won’t turn over as in motor locked up and won’t spin? Then seized which is unusual. Won’t turn over as in won’t start? Sheared woodruff key on ignition flywheel. Fairly common. 1 Quote Link to comment Share on other sites More sharing options...
lineaway Posted April 13, 2019 Report Share Posted April 13, 2019 Nicked the piston. The rings are now stuck. Pull the exhaust and look at the piston. Quote Link to comment Share on other sites More sharing options...
copemech Posted April 13, 2019 Report Share Posted April 13, 2019 and all because you did not insure the throttle slammed shut and made the proper sound after you did not get the cable back nin proper position! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.