Andy B Posted June 10, 2019 Report Share Posted June 10, 2019 I have a 200 Fantic with a really mashed up brake rod. Anybody know where I can get a new one? If not I'll make one, has stainless steel rod been used successfully bearing in mind the couple of bends needed to navigate the shock. Quote Link to comment Share on other sites More sharing options...
Cheneycol Posted June 11, 2019 Report Share Posted June 11, 2019 I've got one to make for mine as well and plan on using stainless rod. Shouldn't be a problem. Quote Link to comment Share on other sites More sharing options...
teamferret Posted June 11, 2019 Report Share Posted June 11, 2019 I've used stainless threaded rod with no issues Quote Link to comment Share on other sites More sharing options...
Andy B Posted June 14, 2019 Author Report Share Posted June 14, 2019 That's it done then, I'll give it a good test this weekend in my first trial for 17 years! 1 Quote Link to comment Share on other sites More sharing options...
Andy B Posted July 4, 2019 Author Report Share Posted July 4, 2019 Thumbs up for 6mm stainless rod! I also found a nice clevis for the brake lever end too. Bit of a fiddly job getting the least amount of bends in to safely clear the shocks and boot area but works a treat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.